TYPE 2 OR 3 (PURE OR RO WATER) FROM TAP WATERFebruary 23, 2024
PROTEUS 40
Type 2 or 3 (Pure or RO Water) from Tap Water
The Complete Lab Water Solution
INTRODUCTION – The PROTEUS 40 is an all-in-one, modular-designed pure water system with a production rate of 40L/h.
The internal 80l tank and the frequency-controlled booster pump makes it the ideal solution for supplying several consumers with pure water.
Everything built in one space-saving cabinet on rollers.
Optionally available with an economic EDI module and an external tabletop dispenser.
Innovative User Interface
Due to clear icons the controller allows you to operate the system intuitively just like a smartphone.
All relevant values are permanently supervised. Further to the general information like conductivity, resisitivity, temperature, production rate and operating pressure, your PROTEUS system reminds you early enough when a change of consumables is necessary or whenever a parameter is out of specification. This guarantees the correctness of all analysis.
An integrated leak water detector would prevent from a possible malfunction of the unit. As all values are continously monitored you can rely 100% on your PROTEUS system which saves time and money.
Efficient Production Unit
Everything is build in one space-saving cabinet which fits perfectly under the laboratory bench.
Highest quality parts and components ensure that ultrapure water is always available and avoid downtime in the lab.
The PROTEUS 40 system provides pure water consistently. You can fully rely on the water purity for your applications.
The combination of long running, elaborated consumables and the possibility to change all filters separately and only when its needed, the annual costs will be minimized.
Intelligent Features
The pure water storage tank ensures that high-quality pure water is always on hand and ready to use. Check and adjust the tank level in one percent steps to your specific needs. Made of black PE. Closed, square and opaque construction with a sterile overflow and a sterile vent filter + CO2 Absorber.
Fully integrated, self-priming, compact booster pump with extremely low-noise permanent magnet motor and water cooling. The integrated speed control enabling the keeping of the perfect pressure at the consumers, meaning that the pump performance will increase with increasing demand. Equipped with a built-in dry run protection. Adjustable high flow rate of max. 3m³/h at 2.5 bar.
The PROTEUS 40 can be upgraded with an EDI module. The ion exchange beds in the EDI cell are regenerated continuously so that they do not exhaust in the same way as common ion exchangers. An EDI unit may operate for many years before a replacement is required. Typically product water resistivity of >15 MΩ.cm is consistently achieved using this process. This technology will increase the lifetime of the final polishing cartridge significantly and also deliver more consistent purity than single-bed ion-exchange systems that may release weakly bound ions as the media exhausts. The EDI module also reduce the release of organic impurities. This helps to reduce your operating costs.
The 265nm UV lamp, which can be integrated as an option to prevent microbiological growth. Mercury-free technology to protect the environment.
An optional UV tank sanitization module prevents the growth and proliferation of bacteria inside the 80l tank.
Add an external dispenser to the PROTEUS system to control and dispense the pure water directly on the bench. With integrated high-precision volume dispensing, sterile filter capsule and intuitive dispensing wheel.
Additional ion exchange cartridge as residual desalination. Integrated into the circulation and monitored via an additional measuring cell.
Externa Dispenser -Optional
Specifications
| Feed water requirements | |
|---|---|
| Feed water quality | Potable tap water |
| Conductivity @ 25°C | < 1000µS/cm |
| Total organic carbon (TOC) | < 1ppm |
| Inlet pressure | 1 – 6bar |
| Temperature | 5 – 35°C |
| Pure water specifications | |
| RO retention rate | > 99% salts, germs and bacteria (Type 3) |
| Residual conductivity (with optional EDI) | 0.06 – 1 µS/cm |
| Typ. residual conductivity (with optional EDI) | < 0.1 µS/cm |
|
Total organic carbon – TOC (with optional EDI)
|
≤ 30 ppb |
| Silicate reduction (with optional EDI) | ≤ 0.1 mg/l |
| Production rate | 40 L/h |
Dimensions PROTEUS 40
| AMC | AMC is available. Please request it during early Negotiations |
|---|---|
| Extended Warranty | Extended Warranty is available. Please request it during early Negotiations |
Only logged in customers who have purchased this product may leave a review.
-
PIXCELL CHEMIDOC
PIXCELL CHEMIDOCFebruary 1, 2024 -
PIXCELL MULTIDOC
PIXCELL MULTIDOCFebruary 1, 2024 -
POWER SUPPLY
POWER SUPPLYFebruary 25, 2024 -
Freeze Dryer
Freeze DryerFebruary 25, 2024
-
ACCESSORIES
ACCESSORIESFebruary 24, 2024 -
RO APLHA – TYPE 2 OR TYPE 3
RO APLHA – TYPE 2 OR TYPE 3February 23, 2024 -
TYPE 1 (ULTRAPURE) FROM PURE WATER
TYPE 1 (ULTRAPURE) FROM PURE WATERJanuary 30, 2024 -
TYPE 3 (RO WATER) FROM TAP WATER
TYPE 3 (RO WATER) FROM TAP WATERFebruary 23, 2024
There are no reviews yet.