PRODUCT FEATURES – One system · two power supplies · independent control · four outputs
EPHC 400 dual channel high current electrophoresis power supply is different from other electrophoresis power supplies in the market. It has output interfaces controlled independently at both ends of A and B. It can run two different programs at the same time. One machine is dual-purpose, avoiding the conflict when doing experiments at the same time and improving the utilization rate of the instrument. The output current is up to 3000 mA. The product can meet the needs of small vertical electrophoresis, high-throughput electrophoresis and transfer.
APPLICATION AND USE –
Nucleic acid gel electrophoresis
Protein gel electrophoresis




Technical data | |
---|---|
Output technical indicators: | 300 V, 3000 mA, 350 W (Dual channel) |
Output range (programmable): | Volts: 10-300 V (incrementation by 1 V) Current: 10-3000 mA (incrementation by 10 mA) Power: 1-350 W (incrementation by 1 W) |
Type of output: | Constant voltage, constant current, constant power |
Number of channel: | Two, independent control, no interference |
Timer: | 1min-99hr, 59min |
Pause/resume function: | Yes |
Programmable methods: | Stores 5 methods, each with up to 3 steps |
Real-time clock: | Yes |
Automatic recovery after power failure: | Yes |
Display: | 480×320 pixel, 3.5 inches LED, touch screen |
Safety Features: | No-load detection, sudden load detection, ground leak detection, overload/short-circuit detection, overvoltage protection, input circuit protection, automatic opening after power failure |
Input Power: | 110-250 VAC, 50/60 Hz |
Operating conditions: | 0-40°C, 0-90% humidity, no condensation |
Dimensions: | 344 mm x 293 mm x 85 mm |
Weight: | 4.05 kg (8.93 lb) |
PRODUCT FEATURES – Pixcell EPHC 200 high current electrophoresis power supply with output current up to 3000 mA. The product can meet all power requirements of small vertical electrophoresis, high-throughput electrophoresis, traditional wet transfer and fast semi dry transfer.
APPLICATION AND USE –
Nucleic acid gel electrophoresis
Protein gel electrophoresis

Technical data | |
---|---|
Output technical indicators: | 300 V, 3000 mA, 350 W (Dual channel) |
Output range (programmable): | Volts: 10-300 V (incrementation by 1 V) Current: 10-3000 mA (incrementation by 10 mA) Power: 1-350 W (incrementation by 1 W) |
Type of output: | Constant voltage, constant current, constant power |
Number of channel: | 4 Sets of parallel |
Timer: | 1min-99hr, 59min |
Pause/resume function: | Yes |
Programmable methods: | Stores 5 methods, each with up to 3 steps |
Real-time clock: | Yes |
Automatic recovery after power failure: | Yes |
Display: | 480×320 pixel, 3.5 inches LED, touch screen |
Safety Features: | No-load detection, sudden load detection, ground leak detection, overload/short-circuit detection, overvoltage protection, input circuit protection, automatic opening after power failure |
Input Power: | 110-250 VAC, 50/60 Hz |
Operating conditions: | 0-40°C, 0-90% humidity, no condensation |
Dimensions: | 344 mm x 293 mm x 85 mm |
Weight: | 3.75 kg (8.27 lb) |
PRODUCT FEATURES – One system · two power supplies · independent control · four outputs
EPDU 400 dual channel general electrophoresis power supply is different from other electrophoresis power supplies in the market. It has output interfaces independently controlled at both ends of A and B. One machine is dual-purpose. It can run two different programs at the same time, and no interference can improve the utilization of the instrument and avoid experimental conflict. The product can meet the needs of small vertical electrophoresis, horizontal electrophoresis, high-throughput electrophoresis and transfer.
APPLICATION AND USE –
Nucleic acid gel electrophoresis
Protein gel electrophoresis




Technical data | |
---|---|
Output technical indicators: | 600 V, 3000 mA, 500 W (Dual channel) |
Output range (programmable): | Volts: 10-600 V (incrementation by 1 V) Current: 10-3000 mA (incrementation by 10 mA) Power: 1-500 W (incrementation by 1 W) |
Type of output: | Constant voltage, constant current, constant power |
Number of channel: | Two, independent control, no interference |
Timer: | 1min-99hr, 59min |
Pause/resume function: | Yes |
Programmable methods: | Stores 5 methods, each with up to 3 steps |
Real-time clock: | Yes |
Automatic recovery after power failure: | Yes |
Display: | 480×320 pixel, 3.5 inches LED, touch screen |
Safety Features: | No-load detection, sudden load detection, ground leak detection, overload/short-circuit detection, overvoltage protection, input circuit protection, automatic opening after power failure |
Input Power: | 110-250 VAC, 50/60 Hz |
Operating conditions: | 0-40°C, 0-90% humidity, no condensation |
Dimensions: | 344 mm x 293 mm x 85 mm |
Weight: | 4.05 kg (8.93 lb) |
PRODUCT FEATURES – One system · two power supplies · independent control · four outputs
Pixcell Basic 400 dual channel basic power supply is different from other electrophoretic power supplies in the market. It has output interfaces independently controlled at both ends of A and B. The product can meet the needs of small vertical electrophoresis, high-throughput electrophoresis and transfer.
APPLICATION AND USE –
Nucleic acid gel electrophoresis
Protein gel electrophoresis

Technical data | |
---|---|
Output technical indicators: | 300 V, 600 mA, 120 W (Dual channel) |
Output range (programmable): | Volts: 10-300 V (incrementation by 1 V) Current: 10-600 mA (incrementation by 1 mA) Power: 1-120 W (incrementation by 1 W) |
Type of output: | Constant voltage, constant current, constant power |
Number of output jacks: | Two, Independent control, No interface |
Timer: | 1min-99hr, 59min |
Pause/resume function: | Yes |
Programmable methods: | Stores 5 methods, each with up to 3 steps |
Real-time clock: | Yes |
Automatic recovery after power failure: | Yes |
Display: | 480×320 pixel, 3.5 inches LED, touch screen |
Safety Features: | No-load detection, sudden load detection, ground leak detection, overload/short-circuit detection, overvoltage protection, input circuit protection, automatic opening after power failure |
Input Power: | 110-250 VAC, 50/60 Hz |
Operating conditions: | 0-40°C, 0-90% humidity, no condensation |
Dimensions: | 344 mm x 293 mm x 85 mm |
Weight: | 4.05 kg (8.93 lb) |
PRODUCT FEATURES – Pixcell Basic 200 basic power supply, touch screen control, can be stacked, and can meet the power requirements of small vertical electrophoresis, high-throughput electrophoresis and traditional wet transfer.
APPLICATION AND USE –
Nucleic acid gel electrophoresis
Protein gel electrophoresis

Technical data | |
---|---|
Output technical indicators: | 300 V, 600 mA, 120 W (Dual channel) |
Output range (programmable): | Volts: 10-300 V (incrementation by 1 V) Current: 10-600 mA (incrementation by 1 mA) Power: 1-120 W (incrementation by 1 W) |
Type of output: | Constant voltage, constant current, constant power |
Number of output jacks: | 4 sets of parallel |
Timer: | 1min-99hr, 59min |
Pause/resume function: | Yes |
Programmable methods: | Stores 5 methods, each with up to 3 steps |
Real-time clock: | Yes |
Automatic recovery after power failure: | Yes |
Display: | 480×320 pixel, 3.5 inches LED, touch screen |
Safety Features: | No-load detection, sudden load detection, ground leak detection, overload/short-circuit detection, overvoltage protection, input circuit protection, automatic opening after power failure |
Input Power: | 110-250 VAC, 50/60 Hz |
Operating conditions: | 0-40°C, 0-90% humidity, no condensation |
Dimensions: | 344 mm x 293 mm x 85 mm |
Weight: | 3.75 kg (8.27 lb) |

AMC | AMC is available. Please request it during early Negotiations |
---|---|
Extended Warranty | Extended Warranty is available. Please request it during early Negotiations |
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.